Air conditioners are used in homes, offices, food processing centers, factories, restaurants , shops and computer rooms. The air conditioner operate in a very technical way. It eliminate the heat in the room , take it outdoors. In the central air-conditioning system usually there is an exhaust pipe system. You can check our website www.serviceairconsingapore.com for more information .
There is also an evaporator coil connected to the condenser inside the piping system. The refrigerant sends cold air from the outside into the evaporator to regulate the temperature in the room. Ideally this is the role of air conditioning in the home office; installed at school or anywhere. It has the effect of reducing humidity and temperature under one premise. Its working principle is that colder air can not hold a lot of moisture, so the air gets colder, its moisture is reduced, and eventually it is discharged through the evaporator.

Air conditioning chemical cleaning how many times?
This is a key main issue. Is this dependent on the frequency of use or should it be a normal routine? At the time of purchase a new aircon , most salesman usually recommend to the customer about how many times per year they should service their air conditioner.

What service needs?
The basic of aircon maintenance requires chemical cleaning. At the same time , you also need to check other parts to identify any potential or existent problems, a comprehensive clean-up of the system and the adjustment of maximum efficiency. The process of repairing air conditioners has many benefits.

Service air-conditioning reliable, long life, protect the environment pollution, you can safely and healthily run. This also ensures the high efficiency of the plant, thus reducing energy costs. Regular maintenance can also ensure that potential problems are contained before progress and reduce the likelihood of equipment failure. Overall, this is very helpful for the user to save costs.
I think air conditioning chemical cleaning should be done every 9 months, but this time depends very much on the frequency of use. The heating system should be checked and the equipment used to emit the oil should also be thoroughly cleaned. Chemical cleaning requires a very thorough process involving chemical cleaning of the entire system. This is usually done when general cleaning does not produce the desired result. System is not necessary for a long time cleaning.

For air conditioning, chemical cleaning is necessary because it saves electricity costs by ensuring that , air conditioning life is extended, leakage problems are eliminated, maintenance costs are saved and cooling efficiency is increased. It’s up to them how individuals decide what to do with their air conditioning service, but one thing is for sure, chemical cleaning is a must-have every year!

We all rely on our boilers don’t we. They sit there in the kitchen coming off and on like their supposed to and we don’t give them a second thought, until they go wrong of course then we have to take notice. One day they are happier providing us with hot water and the warmth of the radiators and then the next thing you know it’s all whirr clunk and then nothing. What could have gone wrong? First of all, a call to a Boiler Repair Gloucester firm like http://www.hprservicesltd.com/gloucester-boilers/boiler-repair-gloucester/ should be you first port of call as boilers contain natural gas and electricity two things that you don’t want to mess about with if unqualified. We still have a quick look at some of the most common issues with boilers right now but don’t try and fix them yourself.

mage credit

1. Boiler generally not providing heat and hot water. Its very likely that a value or a diaphragm may have gone somewhere in the system and the boiler is refusing to work as it cannot pump water correctly or how it should. The other issue is it that the pump is gone and there is no hot water being pushed around the system or there is an airlock.
2. Dripping or leaking out water. Do not try and fix this yourself, its highly likely that an internal valve or seal has gone, and the unit will need to be dismantled.
3. It starts making unhealthily sounding noises. Again, this is an internal issue and can be the water boiling or kettling as it is known. Kettling is very common in hard water areas where it is a build up of yucky sludge and limescale deposits that block up the pipes and restricted the flow of water. The water starts to boil and make banging noises in the boiler.
4. 

Image credit

4. If the radiators are not getting hot, we finally get to a job that you can attempt to fix yourself. You will need a towel and a radiator key. You are now going to bleed the radiators. Each one will need a twist at the valve end. Be ready with the towel as if you turn it too far water will come out. This is a good sign as it means the water is being pumped around the system correctly. If you hear a hissing noise this is also good as it means the air is escaping from the radiator and will soon be replaced with hot water. This is quite a common occurrence but doesn’t mean that there is something more sinister going on. If it persists then an expert will be required.
5. Thermostat has given up. This is an issue where the thing that regulates the temperature of the water, if its not working properly then the system will not know when to put the heating on.

If you have any doubts do not attempt to fix this yourself. Call a registered engineer such as the chaps in the link above.

Your boiler/heating system is an essential part of your home’s comforts. Without it, cold weather will become very uncomfortable.

Unfortunately, while many people own a boiler and appreciate the benefits of having one installed, very few appreciate the benefits of taking good care of their home’s boiler. Such behaviour is like having a car that’s used frequently and yet refuse to check its oil, clean it, and service it. Just like such an ill-maintained car, an ill-maintained boiler will likely breakdown at the most ill-timed moment. Whereas, a well maintained boiler will last longer and provide you optimal service for a long time to come.

Asides from being assured your boiler will keep you warm when you most need it, below are some of the other benefits you enjoy if you keep your boiler regularly maintained.

 

• Safety

 

Performing regular maintenance checks keeps your boiler safe. This is especially true if you are using a gas boiler. If using a gas boiler, regular maintenance checks can help you avoid dangers such as gas leaks that can put your entire home at risk. Also, regular maintenance checks make sure your boiler isn’t emitting dangerous levels carbon monoxide gas into your home.

 

• Reduces risk of a breakdown

 

Having a boiler breakdown at an importune time when it’s most needed can be highly inconvenient. To make matters worse, it might take a while before you are able to summon a repairman to come over and fix it. If a boiler is well maintained, the chances of it breaking down all a sudden and without warning is less likely.

 

• Energy efficiency

 

A boiler that is serviced frequently is capable at functioning at optimal capacity while consuming less resources. That is, be it an electric or gas boiler, if it is properly maintained, it will consume less electricity or gas to generate heat. This means that frequent maintenance saves you money in the long run by reducing the expenses of your utility bills.

 

• Boiler will last longer

 

A boiler that is given a thorough maintenance at least once a year, is going to remain functional and definitely outlive a boiler that’s not serviced at all. Thus, to enjoy a boiler purchase for as long as possible, have it serviced as often as possible. Also, the cost of fixing a well-maintained boiler is usually less compared to an ill-maintained boiler that suffers a catastrophic malfunction.

 

• Lower emissions

 

A well-maintained boiler is more environmentally friendly as it emits less amounts of environmentally unfriendly waste. This mean you are keeping not just your home safe, but also the environment.

1. Boiler cover claims

In the event you seek to make a boiler cover claim, you should be aware that your insurance company will request for records of past services carried out on the boiler to determine if you qualify for a boiler repair claim.

Those are all the benefits you get to enjoy if you keep your boiler maintained. To keep you safe, experts such as FixMyAc recommend a thorough boiler maintenance by a licensed professional at least once a year. If you choose not to follow this advice then at least get your boiler serviced as soon as you see any of the following signs that indicate your boiler is about to turn dangerous;

• Seeing signs of scorching, soot, or black spillage marks around your boiler
• Smelling fumes or spent gas
• If the boiler’s pilot light’s flame turns yellow or keeps going out
• And most important, if anyone in your home complains of headaches or nausea anytime the boiler is on. This could mean the boiler is emitting deadly odourless fumes.

It’s such an exciting journey to have your own AC in your home. Aside from the joy of purchasing one of the huge investments in your life, which is your home. Your appliances also give you the same happiness as it completes the home of your dreams.

However, it’s not that easy to install your own AC in your home, and it could lead to devastating outcomes if you don’t ask for professionals to do it. So, what are the vital factors when it comes to AC installations in West Palm Beach, Florida?

In this article, you will have an insight to what factors can affect a successful AC installation and what you should do before and after installation. Have a smooth and safe installation in your home.

Path To A Successful AC Installation

Is your existing air conditioning unit properly installed? It may sound like a strange question. The air conditioner is working. Therefore, it is in the right place. It might be true or false. More than simply getting the system to operate is a requirement for a successful A/C installation.

To have a good air conditioner installation, there are five aspects to consider.

 

• Size Of Both Your Home And Air Conditioner

Today’s modern air conditioners come in a variety of styles. Window air conditioners, split air conditioners, and portable air conditioners are examples of these. Instead of the size of the room or space, you wish to cool, choose the size of the air conditioner.

Unless the size of the air conditioners corresponds to the size of the room will proper installation and cooling occur.

Your air conditioning system must be appropriately sized for your home. A professional installation begins with the HVAC contractor calculating the size of the system required using the ACCA’s Manual J.

To estimate the size system, you need manual J calculations, which calculates the size of your home and its layout. If the air conditioner is too big, it will run on and off often, preventing the appliance from dehumidifying the air.

If the system is too tiny, it will continue to operate indefinitely, increasing your energy expenses.

 

• Your Ductwork’s Durability

Outdated ductwork might allow up to 20% of your cool air to escape into the attic or crawlspace. For better air conditioning installation, the ducting must be addressed.

One alternative is to replace it. The alternative option is to perform any required repairs, encapsulate the system, and insulate it.

 

• Pick a Good Contractor Who is Certified, Guaranteed, and Competent

The registered contractors’ techies and experts go through at least a year of air conditioner installation and repair training. Hiring a competent air conditioning installation provider is usually wise and preferable

 

• A Harmonious Airflow

Your air conditioner must move a specific volume of air to keep your house cool. For some scenarios, the A/C manufacturer provides acceptable airflow rates.

The HVAC contractor will modify the airflow according to those requirements and check that everything is operating properly in a professional installation.

 

• Refrigerant’s Charge

The manufacturer will also specify how much refrigerant is required for the system to function properly. Before switching the unit on for the first time, the HVAC contractor needs to examine the refrigerant levels.

The equipment will not cool effectively if the refrigerant levels are lower, and your energy expenses will rise.

Ensure A Successful Installation

People’s big concern is for their air conditioners to provide cold temperatures in the scorching summer and hot temperatures in the freezing winter. But we disregard the actions that may cause and affect the quality of our air conditioning units.

If you suspect your air conditioning unit is not installed properly, it’s time to collaborate with a reliable and trusted HVAC service provider for a perfect West Palm Beach AC installation.

Everyone experiences heating and air problems once in a while. Malfunctioning thermostats, low airflow, and improperly cooled air are all common issues that HVAC units encounter.

But sometimes these problems are simple to fix, and if you can fix them yourself, you could save hundreds of dollars in needless repair bills. Here are three things you can try before you call in the professionals.

Check the power

If you’re not hearing any noise from your HVAC unit and it appears not to be working at all, you’ll first need to check the power. HVAC units are commonly on their own circuits, and this means it can trip its breaker without turning off anything else in the house. You should be able to easily locate your unit’s breaker box and check all the switches. Even if it wasn’t tripped, it’s a good idea to go ahead and flip it off and back on again. Sometimes just resetting the power is all it needs.

Check the weather

On extremely hot days, your air conditioning unit may struggle to keep up. This is especially true with older units or units that are too small for your home. If it worked fine until just recently, however, you may have another problem.

Start by examining the outside unit for ice around the coils or the connection running to your house. Sometimes in extremely hot weather, the air conditioner never has a chance to shut off, which can cause it to freeze up. If this is the case, all you can do is shut off the unit entirely and wait for it to thaw. This could take a few hours, or up to 24 hours. You may then have to set the thermostat a little higher to keep it from happening again. Also, check for piles of leaves and other debris that may be blocking the airflow.

During extremely cold weather, you may notice problems with your heater not keeping the temperatures as warm as you’d like. Just like with air conditioning, this could mean you have an older or wrongly-sized unit. It could also mean that your house isn’t properly insulated. Check your windows and doors for drafts; you can often correct this problem with weather stripping and draft guards. You can also keep doors closed to rooms you’re not using and install insulated curtains to keep cold air out.

Check your air filters

The most common culprit for improperly working HVAC units is dirty filters. When these get clogged, they prevent proper air circulation. This means your unit is running, but probably not putting out much air. And the air it is putting out is probably not the right temperature. Dirty filters also put unneeded wear and tear on your HVAC unit because it has to work a little harder to get enough air. A good rule of thumb is to replace your filter every couple of months. But you may need to replace it more often in certain circumstances.

For example, if you have indoor pets or people in your home with allergens, you may need to swap out the air filter every thirty days. And if you notice there’s a problem with your unit, go ahead and check it more often. You can also vacuum them off between replacements to keep your HVAC system working well.

If you’ve checked all this out and your unit is still not working properly, then it’s probably time to call the professionals at local companies like Affordable Air and Heating. You can let them know the exact issues and the checks you performed so they can better assess the problem.

Around 75% of American homes have air conditioners, which makes the AC unit one of the most common equipment in the U.S. The scorching heat in summer can be unbearable, a reason enough to make homeowners invest significant sums on efficient air conditioning. A reliable air conditioning system is not an option, it’s a real necessity.

To keep your indoors comfortable, your AC must be functional and efficient, especially during summer and fall. Nonetheless, there are times when your AC may not be functioning properly, and at times it isn’t easy to pinpoint the reason. Below are some of the various reasons your A/C isn’t cooling your home properly and what to do about it.

The Refrigerant Is Low or Leaking 

Your AC unit uses a chemical known as a refrigerant to transfer heat from inside your home to the outdoor space. If the refrigerant level is low, your air conditioner may fail to properly cool the air in your home. The low refrigerant level is mainly caused by undercharging the AC during installation. Nevertheless, you should first check for any leaks before adding more refrigerant. In case of a leak, it’s advisable to consult a professional AC technician right away. Although rare, an HVAC refrigerant leak can be harmful to the environment in addition to causing health problems.

Lack of Proper Maintenance of the Outdoor Unit

Once the indoor unit absorbs the heat around your house, it then transfers the heat to the outdoor unit. If the outdoor/condenser is blocked or dirty, the built-up heat may not be expelled efficiently. You should regularly check the condition of your condenser just like you do the indoor unit.

Remove branches, dirt, mud, and any leaves that could clog the unit and ensure that it’s sitting on an even surface to prevent overworking. If the AC unit still doesn’t work after the maintenance, seek an expert’s opinion.

Tripped Circuit Breaker on the Outdoor Unit 

If your AC unit blows warm air only or fails to switch on at all, your circuit breaker could have tripped. You may also be experiencing a blown fuse. Check your fuse and electrical panel and simply reset it.

Faulty Fans

Your AC system has a fan that blows air over the outdoor unit to expel built-up heat outside, and another that blows air over your indoor unit to cool your home. Either of these fans could stop working due to lack of lubrication, a faulty motor, dirt, debris, and worn-out belts, gradually causing poor airflow. Learn to turn off your AC from time to time even during extreme heat to avoid overworking your fan and capacitor. If you ignore the problem for too long, it can cause compressor failure and eventually destroy your air conditioner.

Warm Window

If you’ve placed your AC unit at the window where there’s direct sunlight, it’ll be harder to cool your home. Try to move your air conditioner to a less sunny spot. However, if you can’t move it, keep your shades and curtains down to block the sunlight and prevent your home from overheating. Else, check the seals to ensure that cool air isn’t leaking out and hot air from the outside isn’t seeping in. If that’s the case, you’ll need to reseal your unit with weather stripping.

Your AC System is Old 

Like all electrical and mechanical items in your home, the air conditioner has a premeditated lifespan. As it gets older, the more problems arise and the less efficient it becomes. Older units tend to use more energy and effort to cool the home.

While regular maintenance can help extend your AC’s lifespan, it’ll get to a point where you’ll need to replace it to improve energy consumption and efficiency. Whereas you can easily conduct your own research when purchasing a new AC unit, you’ll still need expert help during installation and proper maintenance.

Living in many parts of the U.S would be extremely distressing without an efficient AC unit. While the above reasons can help fix most cooling issues you may encounter, it’s sometimes more practical to seek professional help. If your unit doesn’t work as expected even after troubleshooting, contact an HVAC expert to pinpoint the exact problem and provide effective solutions.

Image Source: Unsplash

Summers in West Palm Beach are lengthy, hot, unpleasant, and generally overcast. Winters are brief, pleasant, breezy, wet, and partly cloudy. The temperature ranges from 55°F to 89°F throughout the year, with temperatures seldom falling below 41°F or rising over 92°F.

West Palm Beach AC Repair is becoming increasingly important in the lives of Floridians as they experience these weather conditions. Air conditioners are important electric appliances that contribute greatly to comfort.

Indoor air quality connects to the air quality within and around buildings and structures, particularly occupant health and comfort.

Understanding and managing common indoor contaminants can help you lower your chance of developing indoor health problems. Indoor air pollution can harm your health immediately after exposure or years later.

In this article, we will discuss how poor air conditioner quality greatly affects your health and the importance of maintaining your air conditioner.

Indoor Air Pollution

When most people think of air pollution, they think of smog and automobile emissions. These are examples of outdoor air pollution. However, interior air pollution is even more harmful.

When certain air pollutants, such as particles and gases, pollute the air in inside spaces, this is known as indoor air pollution. These contaminants in the air can cause respiratory illnesses and even cancer.

Here are the causes of poor indoor quality air:

• Asbestos
• Formaldehyde
• Radon
• Tobacco smoke
• Biological Pollutant
• Varnish, paints, and certain household products
• Synthetic fragrances, perfumes, air fresheners, and deodorants
• Fumes from wax candles
• Wood stoves, space heaters, water heaters, fireplaces, dryers, and fuel-burning appliances
• Paint, lacquer, and other remodeling materials

An air conditioner will directly circulate the sickness-inducing allergens that are already there whether your house or workplace is a breeding ground for mold and bacteria development or a frequently unvacuumed environment.

Air conditioners can assist a home dry up, but they can’t fix the underlying problem that’s causing your moldy or soiled walls and flooring. As these allergens become airborne, they can cause stuffy noses, sore throats, and breathing difficulties in certain people.

If air conditioners are not properly maintained, they may become breeding grounds for mildew and germs. Condensation is formed when air is drawn over coils in an air conditioner. If not cleaned frequently, this moisture may provide an excellent habitat for germs and mold to thrive.

Signs that your air conditioner is of poor quality.

• Significant Dust Build Up
• Inconsistent Air Distribution
• Humid
• Mold And Mildew Growth
• Unpleasant Odors

A Well Maintained Air Conditioner Keeps You Healthier

Although air conditioning illness can be aggravating, there are some things you can take to avoid it. Hopefully, these few pointers will help you clear your brain and go back to feeling like yourself.

It’s best to avoid more costs on air conditioning damage and health hazards. It can not only help you save your money but also save your family. Reach out to a team that provides superior care for your air conditioner.

Contact a certified West Palm Beach AC repair service for a maintenance check in Florida if you suspect an unmaintained air conditioning machine is to blame. Stay healthy!

Is your air conditioning unit working? If your central AC is not cooling the right way, save time and money, get comfortable with these expert Do-It-Yourself AC repair techniques. Although a reputable repair professional should handle various kinds of central AC repairs, people will find techniques for handling simple maintenance and repairs by themselves in this article.

Air conditioning unit problems usually happen during the heatwave season. People need their units the most, and when Heating, Ventilation, and Air Condition repair professionals have tons of job requests. It really pays for homeowners to do their own maintenance and repairs, both in getting the system back working as quickly as possible, as well as in cost savings.

For more information about the basics of the HVAC system, check out this site for more details.

Central air conditioning unit not working

If the unit won’t turn on automatically when its thermostat signals the unit to cool:

Check its main electrical panel, as well as its secondary circuit panels, if the fuse is blown or tripped breaker. If there is a problem there, make sure to reset the unit’s breaker by shutting it down and replace the blown fuse. A central AC usually connects to a dedicated circuit.

If its breaker continues to trip, there is a big chance that there is a short in the system, whether in the fan motor, capacitor, or compressor. Hire a professional electrician or Heater, Ventilation, and Air Condition contractor track down the trip’s source and solve the problem.

Make sure the unit’s thermostat is set to cool, and the temperature setting is at least three degrees below the room temperature.

Ensure that the power of the AC is turned on. Check the switch on the air handler cabinet or furnace. Also, make sure that the compressor’s 240-volt disconnect is turned on. You can usually find it in a metal box found near the compressor.

Remove the thermostat after turning off the AC’s power. Separate it from the base by pulling it straight out and replacing the batteries (only battery-powered). Ensure that every wire is securely attached to the terminals, and the cover will not pinch them. Replace the cover and wait three to four minutes before turning the system on again.

If the problem persists, open the unit’s thermostat and unscrew the wires from the Y terminal, and turn the power back on. Holding the wires by the insulation, touch the R terminal’s bare end for about two minutes. If the compressor runs after doing this, then there is a problem with the thermostat, and you need to replace them. If the compressor does not go on after holding the Y wire to the R terminal, turn it off and call a professional or check its capacitor.

Visit https://www.explainthatstuff.com/capacitors.html to know more about capacitors.

And lastly, check the compressor’s contactor and the capacitor. Usually, AC’s capacitor is the problem. The capacitor, also known as a run capacitor, is found in the compressor unit and sits outside the property or on a flat roof. It both starts the fan and the condenser.

If is faulty, the air conditioning unit will not run. The first thing homeowners need to do is to make sure the problem is the run capacitor and not its contactor. If there’s clicking on the unit followed by a buzz or hum, there is a big chance that what you are hearing is the fan motor trying to start its motor without its help.

Homeowners can conclude that the capacitor is broken or has failed. There are times that homeowners can get the fan spinning by pushing it counterclockwise using a long screwdriver or a thin stick. This will only work for one or two-cycle, but it will absolutely fail the next time the appliance is turned on. It is best to replace or change the capacitor.

If the compressor bleeps or clicks when turning on the thermostat, but it does not buzz or hum, there is a big chance that the contactor failed or broken and needs to be replaced. Just be cautious when handling capacitors since it holds an electrical charge even if you turn off the appliance’s power. This is why the best thing to do if you have a broken capacitor is to call a technician who specializes in fixing an air conditioner system for safety purposes.

AC is running, but not cooling

If you can hear the unit run, but does not cool well or not cooling at all, make sure that nothing is limiting or blocking the airflow anywhere in the system – the registers, the compressor, or the air filter. If the electronic thermostat is not displaying information, there is a big chance that the batteries are dead or wearing out. If the AC is blowing warm air, this would indicate that the blower motor and the thermostat are operating. Still, the outdoor compressor or refrigeration system is not working, or air is not circulating properly. Usually, it happens because of dirty AC filters.

With all the rebates being offered on home air conditioners, you might wonder why energy companies are so quick to put money back in your hands. After all, they are better known for relieving you of your money, right? All good-natured ribbing aside, the reasons energy companies offer rebates on new air conditioners are significant and no matter how leery you might be about a deal that seems like it’s “too good to be true”, there’s really no downside to it whatsoever.

 

Air conditioning rebate reason #1: lower the cost of entry

Newer, high-efficiency air conditioning systems can be quite expensive. This could be a barrier for many homeowners as they might see it as non-essential, choosing instead to make do with their old system. By offering a rebate, it encourages consumers to invest in newer, more energy-efficient technology, reducing the ecological impact of energy consumption and making life generally better for everyone in the process.

 

Air conditioning rebate reason #2: the government wants you to be energy-efficient

Think of it as a car company paying you money to get that old clunker off the road. Your older AC systems are a major drain on electricity and put a lot of stress on the grid during those hot summer months. This is the time of year when everybody has their AC system running at full blast, so the more efficient these systems can be, the better off we all are. The government is behind this 100 percent.

 

Air conditioning rebate reason #3: helping homeowners to help themselves

Everybody loves to save money. By switching to a newer, Energy Star rated, high SEER AC system, you will definitely save money over the long-term, but an up-front rebate can ease the burden and expense of making that initial investment. While you might not think that energy companies care much about your wellbeing, these rebates are proof positive that they do care and that they’re looking out for you. They recognize that the high price of a new unit might be a little too much to swallow, so the rebate offers an incentive to invest with no regrets.

 

Air conditioning rebate reason #4: higher SEER ratings, more money in your pocket

Incentivizing the purchase of a new air conditioning system includes more money back for higher efficiency units. The more efficient the AC unit is, the more energy will be saved and the more resources there will be to go around in the future. Offering maximum rebates for the highest-rated products just makes sense as the more energy we can conserve, the brighter our future will be – both here at home and around the world.

 

Bottom line – if you are considering the purchase of a new air conditioning system, there really is no better time to dive in. Energy companies across the country are offering generous rebates on high-efficiency systems, making easy to get some of that cool comfort you crave!

 

Don’t forget, to get the maximum rebate, you need to work directly with a qualified HVAC contractor. If you live in the Denver area, call Summit Heating and A/C to find out more.

We live in a tough economy so having an AC unit that breaks down is not ideal. AC repair is often much more expensive than what many think. There is no mechanical system that will not need some sort of repair in the future but most are actually preventable. If you want to prevent AC unit breakdown, AccuServ offers these really useful tips.

Dealing With Dirty Filters

A 1 inch disposable filter has to be replaced every single month. Unfortunately, this is often forgotten. Many service calls are connected with the filter that became dirty and was not replaced. A dirty filter is going to drastically reduce the air quality indoors and the entire home will become less comfortable. At the same time, indoor coils can end up frozen. If this happens there are different serious repairs that would be necessary for the AC unit.

Tripped Breakers

Tripped breakers are going to cause the AC unit to not cool the air and are much more common than what people think. The good news is that this tripped breaker can easily be reset. If the breaker keeps tripping, you have to call the AC professionals. It is possible that the breaker is bad, the capacitor is bad or a wire is loose. When you do not solve the simple problem it is a certainty that really expensive repairs are going to follow.

Leaking Refrigerant

Al AC units are sealed. Refrigerants should never leak. In the event you see this leak, it is quite obvious that something bad happened. If you keep using the unit you would be faced with really low efficiency and increased electricity use. The air conditioner may not even be able to cool the room anymore. Coils can freeze and compressors often get damaged to some degree. To make matters even worse, refrigerant gas is greenhouse gas. Although something as simple as a defective valve may be the case, as soon as the leak is seen you should close your AC and contact a professional to check everything.

Clogged Drain Lines

Temperature is lowered in the home as moisture is eliminated from humid air. Draining out moisture is normally done through plumbing systems. Drain pans have to be added as backups and secondary drains for condensate are needed. Unfortunately, sometimes these end up being clogged, often because of the presence of algae. Home water damage can appear in this case. You want to contact the professionals when you notice signs of home moisture or when it is clear that drain lines are clogged. Fortunately, this is rare when you go through a spring checkup.

Duct Leak

If you use forced air heating and cooling systems, conditioning air is gained through payment. There is ductwork that is going to deliver air to various rooms. When ductwork is present in areas that are not easy to access by you, it is really possible that a leak cannot actually be determined. Unfortunately, this means that you are going to pay more. Whenever you notice your electricity bill climbing without any visible reason in the home, checking the entire system becomes a necessity.

A heat recovery system – or heat exchanger – in your home can be a great investment and dramatically reduces the costs of your central heating, particularly if you have a larger house. Heat recovery systems are only suitable for homes which are well-insulated and airtight, as the heat recovery system cannot operate efficiently where warm air is able to leak out of your home.

The smaller number of air leaks in your home, the better the heat recovery unit will work. More modern houses tend to be pretty airtight and well-insulated, whereas older ones may need some work doing to them before a heat recovery unit is installed. On the contrary, if your home is 100% airtight, a heat recovery system will be a pointless investment because you will barely ever need to use your central heating.

#1: What Exactly is a Heat Recovery System?

It is a unit comprised of a control unit and a heat recovery system. The control unit is typically housed in your attic or utility room; however, this depends on your home.

A heat recovery unit sucks warm air out of your rooms and sends it through the unit’s ductwork and through the heat exchanger where the heat is removed from the warm air and passed to the cool, fresh air on the other side of it. This means that your cold air is pumped outside of your home and warm fresh air is pumped in.

In short, a heat exchange system gets rid of stale air from within the home and pulls in cold, fresh air from outside, heats it up, and pumps it through your home.

#2: Reasons to Get a Heat Exchange System

A well-designed and properly fitted heat recovery system in a home with adequate insulation and low amounts of air leakage will massively benefit from a heat exchange system. In addition to providing good levels of ventilation, a heat exchange system improves the overall quality of the air within your home which can stop condensation and mould from forming, in addition to saving you money on energy costs.

In the long-term, your initial investment into a heat exchange system can massively pay off. They are definitely a long-term investment, though; don’t expect to breakeven straight away!

#3: Ensure Your Property is Suitable

Older homes typically have a lot of draughts and air leakage which will make the use of a heat exchange system rather pointless. If you were to have a heat recovery system fitted into a draughty home, the internal air would be cooled too much, and it would not be worth the cost overall.

Spending some money to get your home’s energy efficiency sorted is a move which we should all be making, regardless of whether you are getting a heat recovery system or not.

A heat recovery system is used in more modern homes to help keep the internal air warm, clean and fresh. They are only suitable for homes which have an adequate amount of insulation and can save you money on energy bills in the long-term.