heating

5 things you should know about installing a heating system in your home

by

 <2016/08/5-things-you-should-know-about-installing-a-heating-system-in-your-home.png">5 things you should know about installing a heating system in your home

A heating system is very important to provide warmth and make you comfortable all year round in your home. This enables you to enjoy warm and cozy temperatures at your place during chilly winters. However, you need to know what heating systems are available to you, how they work and their cost variations. The following are five tips you should be aware of before installing a heating system in your home.

  1. Types of heating systems that can be installed in your home

You may choose to install any of these common heating systems in your home. Each has its pros and cons. It is therefore important to quickly have a glance before making your decision to install a heating system in your home.

  • Forced air system

This system is by far the most common type of heating system in the home. The air is heated in a furnace and distributed through ductworks into the room. Furnaces may heat air using various fuel sources such as natural gas, propane, oil or electricity. The advantages are: the air may be filtered, humidified and dehumidified as the case may be. It is inexpensive and can attain the highest AFUE. However, it requires ductworks and takes space in the wall, moving air can distribute allergens, and this system, requires filtration and regular maintenance.

  • Radiant heating system

This system is known to provide the most natural and comfortable heat in a home. It can come in a number of forms, from a pot belly stove to in-floor hot water tubing. It works through the process of radiation or direct transfer of heat from a hot to a cold surface. In-floor systems use hot water heated by a boiler. The boiler may be fueled by natural gas, propane, oil or electricity and the heating stoves may use wood or coal. This system is comfortable. Boilers are energy efficient and distribute heat evenly. It is however, expensive to install, slow to heat up the cycle and difficult to access piping for maintenance. Other types of heating systems that can be installed in the homes are: Hydronic (Hot Water Baseboard); Steam Radiant; and Geothermal.

Boilers

A boiler is a vessel that transfers energy (usually gas, oil or LPG) into heat to warm up water. The amount of heat it can produce is measured in kW. Boilers can use a variety of fuels including natural gas, propane, oil or electricity. It usually incorporates a pump to feed the water through pipes to the radiators. Steam boilers are more complex than hot water boilers and have special gauge glass, pressure gauges, blow off valves and automatic feeds. Hot water boilers can be small, compact, energy efficient and low maintenance.

  1. Choosing the Boiler

The boiler is the most important part of the heating system and your choice will impact on how the system operates and its efficiency. Your new boiler should be at least 90% efficient (i.e. convert 90% of the energy it uses into heat), your boiler could be a condensing boiler that utilizes its heat from the exhaust gas within the boiler; it could also be a regular system boiler or a ‘combi’.

  1. Boiler sizes

You should also know that boilers come in different sizes which are measured in kW. You need to specify the right size of boiler that you would need for installing your heating system. Typically, boilers range in size from 15 to 40kW for domestic applications. A boiler that is too large will not only be more expensive but will operate less efficiently than an adequately sized model. Many of the boiler suppliers offer online guides for choosing the right size. You can as well add up the required heat output from the radiators or under-floor heating system (taking into account room sizes, insulation levels and window sizes; then adding 3kW for hot water and a 10% buffer.

  1. Cost of installing a heating system in your home

The next question you may want to ask is; how much will it really cost to install a heating system in my home?

Well, of course the price will depend on the size of your property and whether you already have central heating installed. The total cost is made up of the price of the parts needed to replace or install and the labour it will take for installation. The average cost to install an open vent heating system is £2800-£3000; while for a sealed heating system its £2900-£3200. Included in these, are the price for fitting that can vary between £500 and £1200.

  1. Hiring a registered heating specialist

Attempting to carry out your home heating installation or repairs can easily end in disaster; mistakes can lead to expensive repair costs and some serious inconvenience. So, make sure you hire a qualified local heating professional. Here is a tip on how to hire a professional:

You should make sure you hire someone who has the heating qualifications needed to work safely and competently. Someone who is registered with Gas Safe; which is a legal requirement. Beware that not all heating installers will have these qualifications; many will have carried out apprenticeships under qualified engineers. Lastly, also take into account references and experience as well.

Newhamheating.com is a London based gas, heating and plumbing service provider with a great reputation for serving customers across London. We are licensed and registered with vast experience and many positive reviews on installation and repairs of heating systems.

Get in touch with Newham Heating today at newhamheating.com

 

Home Heating Repair; Ways to Solve the Problem of Heating System

by

<2016/07/Home-Heating-Repair-Ways-to-Solve-the-Problem-of-Heating-System.jpg">Home Heating Repair; Ways to Solve the Problem of Heating System

For who are living in the winter season where often get freeze weather in the day and night, it is recommended to have home heating tool. This is one of most common requirement which are usually bought by many people then set in in their house. For some of homeowner, it can be a tool that must be available always in good function. However, because this is one of electronic tool type, so we have to understand that sometimes it needs to be repaired. To make a good home heating repair, we have to know about some ways to solve it. Meanwhile, for who don’t have ability to repair it, or who don’t have a time for doing that, it will be good to hire professional service.

Know How It Works

Because this article is focus on talking about the way to solve problem in heating system, so we need to find know first about how it works actually. Obviously, before knowing and learning some ways to solve the matter and trouble with the heater product, we need to find know about the way of heating works. If we know about the heating system works, then we will find know also about what we have to do when there is a problem happened there. Yet, if we don’t learn about how it works and just feel the function only, so it will be hard for us to be able for repairing it alone by ourselves actually.

Heating System Doesn’t Work Properly, Why?

After knowing the system of working from the heating system, you then will know about what are usually able to be causes of making it doesn’t work properly. Sure, if it doesn’t work well, certainly there are some problems which are happening on the tool. There are some causes usually become the factors of what make it bad on work. Many things must be checked due to there are some parts elements are in the heating tool. One of the most common problem as the cause is the part of thermostat where it need to be the main part that must be work well.

How to Fix the Problems?

After we find the causes of the problem which make the heating system is not working properly, we then need to fix the problem. There are some fixing ways we can do whether repairing part of them, or replace with the new one. If we don’t know more about what we have to do with the part problem, make a good decision for hiring professional service. Usually, most of them are certified technician who have known more about what must to do with the heating system to fix all the matter. Ask them and give the authority for doing what must be done actually till then you will find know about what must be done in action.

Be Sure to Deal with Professional Service

If you have to decide for hiring the service provider to help you fixing the problem with your heating system, you need to hire professional service. Though you can find so many offers in the same type, but you need to keep in mind for finding the service company locally. You can contact them to ask for coming you’re your home. After then, tell about what your problem so that then you will get the solution offers and able to be done by the professional certified technician. For who are in the Arizona state, you can try to contact heating repair Litchfield Park AZ. It is one recommended technicians that can upgrade your heating system to add value to your home.

Did you know that heating system in a home could be an important thing that must be set and take it care carefully? When going to sell your home, especially if it’s more than 15yrs old, telling the potential new owners that your heating system is brand new could be used as a selling point. It shows that heating system can be a main important needs for homeowner especially in the state or country which as the winter season. It can be used to add the warm condition when the day and night to be so freeze. Thus, we have to keep it in good condition; if it is in problem, fix it then with professional home heating repair service.

Effective Ways To Prevent Home Heating Loss

by

HVAC systems are quite useful for a home. They will add comfort and value by maintaining a proper room temperature during a colder month. The problem is that you cannot simply install the system and forget it. Eventually you will have to contact professionals like at http://accuservheating.com/ to get some repairs done. While there is not much that you can do about that, you can always make sure that the strain on the system is low. You do this by preventing home heating loss.

Draft Elimination

If you want to keep energy bills low, it is important to find ways in which warm air will remain inside the home while you keep cold air out. You do this by getting rid of the drafts that come from holes present in the roofs or from the gaps you see under your door. Various modern draft excluders exist on the market at the moment. They are inexpensive and pretty simple to install.

Is Your Chimney Suitable?

Homeowners generally do not know that open fireplaces are going to drastically hurt their saving efforts. You want to be sure you have a chimney balloon of a good quality and that it is installed by someone that really knows what he is doing. Taking this approach will guarantee that hot air is not going to leave the home through a fireplace. When lighting fire you need to remove this balloon though.

Reflective Radiators

A radiator that includes reflectors keeps heat inside rooms while preventing losses that would appear through walls. Heaters with reflectors will mean that HVAC systems do not have to run for that long. Hot air is going to be confined. Similarly to the hot air chimney balloon, skilled professionals should install these.

Wall Insulation

Around 30% of the heat loss that appears in a home happens through walls. You want to get rod if this through a review of the wall’s insulation. When wall insulation is moist or does not exist, cavity wall insulation projects will be so much more helpful to reduce heating costs than you may think. Modern wall insulation uses materials that are pretty expensive. However, this investment is one that will pay itself.

Heavy Drape Use

The heavy drape will curtail hot air losses from rooms as weather conditions are cold while also helping by absorbing sunlight. Such curtains will block wind and cracks are not going to be a problem anymore around window edges. The drapes are now available in various designs and sizes. That will surely suit your preferences and needs.

Keep Your Doors Closed

Last but not least, this is the simplest thing that you could do. Just keep doors shut as the appliances are on. That will drastically reduce heating costs. If the HVAC systems work while the doors are open, they will find it much harder to properly heal the home. The system is forced to work hard in order to keep homes warm. When doors are closed there is no extra unnecessary heat loss that appears.