Marble has been utilized for centuries as a construction material because of its aesthetic qualities. As far back as ancient times, marble has been used to create anything from sculptures and houses to worktops in bathrooms and bedrooms. However, marble’s beauty will only last as long as you maintain it properly. Due to its porous nature, the stone is easily stained, particularly by acidic liquids, which is one of its most significant drawbacks. Orange juice, coffee, wine, and soda are all examples of acidic foods and drinks. Acidic substances will erode at marble’s surface if they come into touch with it. Etch marks will form on the surface as a consequence of this. Cleaning marble, removing particular stains, and sealing marble are all covered in this tutorial.
Basic Cleaning Techniques
There isn’t a lot of equipment you’ll need for basic cleaning. A good tip is to avoid aggressive cleansers on marble countertops or other surfaces since they might harm them. Learn more about general cleaning in the following section.
What You’ll Need: Cleaning Supplies
Listed below is everything you’ll need for everyday cleaning.
- Warm water
- Mild dish soap
- Spray bottle
- Marble cleaning solution
- Dish cloth
- Absorbant towel
General Cleaning: A Step-by-Step Guide
Learn how to clean marble by following the methods outlined below correctly.
Step 1: Make a Soap-Water Mixture
Spray a tiny quantity of warm water and mild dish soap into a spray bottle. The spray on the counter or other flat surfaces often liberally applies. After this, use a clean, moist towel to scrape and wipe the mixture away gently.
Step 2: Wipe the Surface Clean.
After wiping off the mixture with a clean, damp cloth, use an absorbent towel to dry the area you are cleaning.
What Is the Best Way to Remove Stains from Marble?
Marble is susceptible to stains, so you’ll need to keep an eye out for them. Because of the material’s susceptibility to stains, you’ll want to exercise caution while working with it. However, stains are almost always unavoidable. You can learn how to remove typical stains from marble countertops and other surfaces in the following step-by-step instruction.
Do You Know How to Get Rid of Water Stains?
Make use of the steel wool pad in Grade 0000 to remove water stains or rings from the surface of your marble. When placing anything on a marble countertop, use coasters or trivets to prevent watermarks and circles from forming.
How to Get Rid of Mold
Using a spray bottle, combine three parts bleach with one part water and a little bit of dishwashing detergent to get rid of mildew in your home. Spray until the stain is gone. Then, use water to wash and dry the surface.
Organic Stains: How to Remove Them
Coffee, tea, wine, juice, and other food ingredients are examples of organic stains. Mix 12 percent hydrogen peroxide solution with a few drops of ammonia in a small bowl before using it for cleaning. Use a clean cloth to remove the stain once the solution has been applied. Then use a chamois to dry and a damp towel to clean.
Stains Made by Oil and How to Get Rid of Them
The stains caused by grease, milk, or cooking oils are oil-based stains. In a light liquid cleaning, these may be cleaned using ammonia, acetone, bleach, or mineral spirits. Make sure you use a gentle cleaning method rather than a scrubbing one.
Getting rid of ink splatter
To remove ink stains from a marble surface, use a cleaning solution made specifically for that hue of marble. Soak it in a 20% hydrogen peroxide solution using a cotton swab and rub it into the marble surface. If the marble is deeper in color, you will use acetone instead of the 20% hydrogen peroxide solution to finish this stage. A poultice is needed if the ink stain has already set in or if it is enormous.