If you are interested in building your own home heat recovery system and know how to use a drill, this could save you extra money on your new investment. Here is a quick guide to installing your own home heat recovery system without leaks, maintaining your safety at all times.
Purchasing Everything You Need
The best way to ensure you have everything you need when installing your own system is to buy from a reputable source. At https://www.bpcventilation.ie/ they sell their very own do it yourself home heat recovery systems, meaning you won’t have to shop around for individual parts. They also take into account the size of your house, meaning once you have measured around, they have kits specifically made for your sizing; this can make your life that much easier when carrying out this task.
Considering Noise Levels
If you are planning to build your home heat recovery system as a radial design, you will not need sound attenuators. These are electronic devices that will reduce the power of a signal, meaning they can reduce the noise of your system. If you are using a branch design to build your heat recovery system, these are a must. They can be thick and, therefore, it is best to ensure that they will fit into your design before you begin the process, as you may find you have a noisy system with no room to install sound attenuators.
Think Ahead
When looking at your final design, you need to consider all possible points. Putting the room valves somewhere that may end up being blocked by furniture is not a good idea. Think about building them into an area where it will never be a problem, such as under a window. Your heat recovery system should also be as twist-free as possible. The more bends that are in any ventilation system, the higher the air resistance, and this means your fan will need more power to work the system, costing more money and creating more noise.
Preparing Ducting
Your ducting can be installed first if you prefer. Always size and cut on the ground, using an angle grinder. Remember to smooth down any edges to prevent accidents and sharp corners on your heat recovery system. Before installing the ducting, clean it from the inside and out with a hose. This can prevent clogging in your system before you have even got it up and running. Often, ducting can have steel filings or dirt trapped inside from cutting and smoothing down edges.
Ask for Help
The internet is a great place to get help when installing your own home heat recovery system and watching others do the same. If you still need help, it may be worth talking to a professional, as you do not want to damage your materials or install a system that does not work.
With the right skills and good know-how, installing your own heat recovery system in your home can save you a lot of money. Remember to buy the correct sizing and purchase from a reputable source.